Here is the ranking of the best products for the Adhesive Strips category :
Command 17024 Poster Mounting Adhesive Strips - White: it is the most purchased, earned an average review of 4,5 with 9868 reviews
Unibond 600685 No More Nails Permanent Strips: silver medal for this product, the average review is from 4,1 with 5129 reviews
Mokani Nano Double Sided Adhesive Tape: third position for this product, with a average review from users 4,5 with 664 reviews
Command 17024 Poster Mounting Adhesive Strips - Wh...
SaleBestseller No. 1
Buy on Amazon
Command 17024 Poster Mounting Adhesive Strips - White, Pack of 12
- Easy to put up - no need for nails or screws
- Easy to remove - enhanced stretch release technology
- Leaves no surface damage
- Features 12 strips per pack
- Each strip measures 46 x 16 mm
great product, holding my pictures very well, I even tried to put my cat on the wall and it was successful!
Make the removal tabs clear
Very strong and do what they are supposed to do. My only complaint is that they are a bit TOO strong! I didn't want the tabs showing since they are white, so they were behind a solid lighting panel on my wall- which I wanted to move. Since I couldn't pull the tab to remove it easily, I had to pry it off the wall and the tab took a patch of paint off the wall with it! I'd have given these a full 5 stars is the tab had just been clear so I didn't want to hide them and make them and make removing a pain in the ass.
Super handy little strips
I bought these strips to hold up some acoustic foam panels. At first, I thought I would get away with several strips of double-sided mammoth tape per pannel. However, each of the panels started to fall off one by one within a day. I then tried these strips... I only put two strips on each panel in the top two corners... I wasn't sure if two would do the job but I wanted to see how they faired. To my surprise, all of the panels remained stuck to the wall and it's now been 2 months without a single panel falling off! It is also nice to know that they won't leave a big mess on the wall or damage the plaster like an adhesive spray would. If you're looking to do a similar job then I cannot recommend these enough! no need for the bigger strips either so can save a bit of money on these smaller ones.
Buy on Amazon
Unibond 600685 No More Nails Permanent Strips, Adh...
SaleBestseller No. 2
Buy on Amazon
Unibond 600685 No More Nails Permanent Strips, Adhesive Strips for Fast & Easy Mounting, Double Sided Sticky Tape for Interior & Exterior Use, Waterproof Tape, Pack of 10
- Multi-purpose – The versatile double sided adhesive tape offers high-strength adhesion and is designed to complete jobs both inside and outside the house.
- Versatile use – The practical mounting tape strips are ideal for a range of uses including mounting hooks, signs, numbers, pictures, car number plates etc.
- High-strength – The hanging strips are able to hold up to 3kg per strip and are ideal for use on wood, ceramic, tiles, metal, brick, stone and most plastics.
- Waterproof glue – The no more nails strips are waterproof and white in colour, ensuring long-lasting durability and discreetness both inside and outside the home.
- Package Contents – Unibond No More Nails Permanent Strips, strong double sided tape for mounting jobs inside & outside the home, for most materials*, holds up to 3kg, waterproof, white, Pack of 10
Strong gripping tape tabs! 💪🏻
After buying some cheap little plastic lights to stick on my fence, I became increasingly frustrated with them falling off after a powerful gust of wind or some heavy rain. I wanted the fitting (to the concrete post) to be sturdy but without causing damage and the other tapes I used just didn’t cut the mustard. I purchased these as they are advertised as indoor or outdoor use and, so far, they’ve been superb! Simply stick onto the object you want to hang, peel the back off and stick to the location where to want it to go. What could be simpler than that? Over the past week we’ve had a mixture of heavy rain, gusty wind and super hot sun and my lights are still stuck up with these tape tabs. Easy to apply, sturdy and seem to do the job brilliantly. Happy!
Removing the backing strips.
Cut the red strip down the middle with a sharp knife then peel it off from the centre outwards comes of a treat.
WARNING: Extremely strong adhesive - ignore the negative reviews
First of all, the negative reviewers clearly didn't read the instructions on the back of the box. You need to clean the surface of what you're mounting onto, as well as the item you're mounting, as to get rid of any dust, water, or oils that will mess with the glue. Then once you've mounted the item, you need to hold it against the wall firmly, if it's a heavy item you should press it hard against the wall for a good 3-4 minutes. I have personally used them to mount a 2kg ethernet switch plus a 1kg 8-plug UK extension lead onto an indoors concrete painted wall. They were still stuck to the wall 4 months later when I had to move. While trying to unmount them, it took me a good 10 minutes involving a strong flat knife (which was bent in the process) to get them back off the wall. The funny part is that the strips themselves didn't actually budge, instead I had completely ripped the paint off of the wall! If you actually follow the instructions instead of just instantly applying them and slapping it onto your wall, then you'll experience an extremely strong adhesive. I've also happily mounted two Google Nest smoke alarms (which weigh around 1kg each) using just 2 permanent strips for each. One mounted on the ceiling, the other against a wall. Several months later, both are still perfectly in place with no signs of detachment. Note: I'm talking about the Unibond PERMANENT strips (with the red plastic on them), not the Unibond yellow ones. I'm thinking some of the reviewers might be confusing this product with the yellow non-permanent ones, which only work for extremely light items (think no heavier than a standard TV remote). Now, if the instructions on the back of the packet aren't clear enough, here's my own step by step instructions and tips for getting a "permanent" stick: ================================ 1. These strips work best on a flat, smooth surface, such as a concrete wall. Be warned that there's no real method to remove them (note the word "PERMANENT" in their name) unlike certain other strips - if you're mounting something onto a wallpapered wall, they will very likely tear the wallpaper off if you try to remove the item, or if the item is too heavy. 2. When using these strips, first make sure the two surfaces (i.e. the wall, and the thing you're mounting) are clean and dry. Surfaces can accumulate dust, lint, and oil from your household, and this can prevent the adhesive working properly. Suggested cleaning methods: - (easiest) lens cleaning wipes - ideally ones containing alcohol. those of you who wear glasses may find this the most convenient method. - 99% isopropyl alcohol (https://www.amazon.co.uk/gp/product/B003D8SDSW) - one of the best options as it's generally safe for most surfaces, shouldn't cause any damage to electronics as long as they're turned off, and generally evaporates within a few seconds of application without leaving any residue. if you don't have any, buy some! it's extremely useful for cleaning electronics without the risk of water damage. - methylated spirit - not exactly common in most households, but is recommended by unibond. be warned that methylated spirit is highly toxic and can damage certain materials. NOTE: when using liquids to clean the surfaces, use a fresh microfibre, or lint free cloth (e.g. AF Safecloths https://www.amazon.co.uk/gp/product/B001J8F7OQ/). other cleaning cloths can leave small amounts of lint or oil that can prevent the adhesive working properly 3. After you've cleaned and dried the surfaces, you should apply multiple strips onto your item and evenly distribute them depending on the size and weight of your item. General rule of thumb - the more strips you use, the more likely the item will stay mounted. Avoid pressing too hard when applying them to your item, or you'll have trouble removing the red tape once you're ready to mount it. - For small items (no wider than a normal sized mug) that weighs less than 1kg, you may be able to mount them with just a single strip in the center. (e.g. small smoke alarms) - For square(-ish) items such as routers, you should ideally place one strip in each corner of the item, plus one strip in the center - this ensures the weight is evenly distributed. - If the item is around the size of (or larger) than a sheet of A4 paper, and weighs at least 1kg, then you should place at least 3 or 4 strips across each edge of the item (similar to mounting a poster with blu-tack), as well as 1 or 2 strips in the center (to prevent too much weight going to the bottom strips). 4. Remove the red tape from each strip, and then carefully press your item onto the area you'd like to mount it. Once you've positioned it correctly, firmly press your item against the wall, making sure to apply pressure to the points with strips behind them. Keep the item firmly held against the wall for at least 2-3 minutes (if the item is large/heavy, more time is better), and apply a lot of pressure as the adhesive seems to be pressure-activated - the more pressure you apply, the stronger it will stick. 5. After enough time has passed, slowly release the item. - Upon releasing the item, watch it for a few minutes to ensure that it's staying put. If the item starts to come loose from the wall, re-apply pressure to it immediately. You may have needed to press it harder and/or for a longer period of time. - For best results, re-apply firm pressure for several minutes after a few hours have passed, this helps to ensure the adhesive has good contact with the surfaces, and will sustain good contact after it settles. - If the item is heavy and has a lot of frontal weight (e.g. a shelf or cabinet), you should place something underneath it that can support it's weight, as the adhesive may need up to 24 hours to settle enough to support it. ================================ If you follow my instructions and consider my tips, then it's likely whatever you mount using these strips will be stuck there for good. DISCLAIMER: This is a 100% honest review based on my own experience. I have not been sponsored by Unibond, Amazon, nor any of the product's I've linked in this review.
Buy on Amazon
Mokani Nano Double Sided Adhesive Tape, Multifunct...
Bestseller No. 3
Buy on Amazon
Mokani Nano Double Sided Adhesive Tape, Multifunctional Reusable Washable Traceless Transparent Gel Tape, Wall Sticky Strips for Kitchen, Party, Paste Photos Posters, Carpet Fixing(3.3FT)
- 【SIZE】: Length: 1 M (3.3FT); Width: 3CM; Thickness: 2MM. Easily cut it to the size you need. It is also stretchy and flexible.
- 【Strong Adhesive Strength】: You can stick it to car or wall to hold decorations firmly. It can hold items up to 1 KG (2.2 LBS) on smooth surfaces. Please don’t use this tape on powder wall, wet surfaces, or uneven surfaces. Because of its strong adhesive strength, it is not suitable for whitewashed walls, which may cause damage on it.
- 【Reusable】: Nano tape is specially made and can be reused: Rinse it and wash the dirt away, air-dry or use a hair dryer to dry, then re-stick it to the place you want.
- 【Leave no marks】: This double-sided tape can stick to almost any kind of smooth surfaces, easy to disassemble without damaging them, so you can arbitrarily paste anything.
- 【Package Includes】: 1 Pack Nano Tapes. If you want to decorate your party and don’t want to get stain on walls, try this one.
Tried a lot of double sided tapes over the years - this is the best!!
I have been trying quite a few double sided tapes as I have been installing alarm around the house. there was one specific sensor which was to go above the kitchen door. I tried many double sided tapes and none were holding the sensor as needed. So much so that the alarm installation had halted for this door for a few months, eventually i found this on Amazon and gave it a shot. It took me five minutes to complete. Great product with a very strong holding. Highly recommended!!
Amazing tape for everything
This tape is absolutely amazing. We used it for so many things already: sticking hue lighting strip to the back of material headframe (worked amazingly the previous tape was not sticking propperly and the led strip was falling all the time), sticking carpet to the floor (now it doesn’t move and doesn’t roll), hanging heavier christmas decorations and lights (used some hooks and then stuck the tape on the back of those) and we still have plenyy of tape left. We never used it on painted walls though as we are afraid it might damage the walls.
I used this to stick an extension lead around the skirting of a wood floor for Christmas lights. It worked wonderfully. Was invisible and held the wire exceptionally well through December.
Buy on Amazon